The Sponge
 
 
Say hello to our newest time saver - The Sponge . . .
 
 
The Sponge is a new hydraulically driven machine to make it easier, faster and safer to remove fluids from vehicles prior to dismantling. The gas tank is punctured with a anti spark brass spike and drained into a 240 gallon plastic portable tank or an optional steel tank. Oil and transmission fluids are drilled with a one-inch drill bit. Both can be drilled and drained at the same time into a 240 gallon plastic portable tank or an optional steel tank. The antifreeze hose is cut and all fluids are easily and safely removed and drained into portable or stationary tanks.
 
This new machine is way ahead of the curve. This unit is available in gas or electric, portable or stationary, for more information call Rhonda at (800)220-9110.
 
 
Specifications
Electric - 15hp 220 or 440 volt 3 phase
OR
Gas - 24hp Vtwin Honda Engine model 6X670TAF
 
Portable gas tanks (for gas model)
hydraulic/oil cooler
Variable speed control on drill motor and oil cylinder
Heavy Duty Drill Motor
Sponge Non-Sparking Brass "Spike"
Sponge dimensions 24' long x 8' wide x 8' high
Approximate weight without tanks 8,200 lbs.
3-240 gallon plastic skid tanks
Maximum capacity 9,000 lbs
Funnel Pans
Gas funnel pan : max capacity 20 gallon with a 2" dia. hose 15' long
Oil funnel pan: max capacity 6 gallon with a 2" dia. hose 15' long
Antifreeze funnel pan : max capacity 5 gallon with a 1 1/2 hose 15' long
3" Steel channel under decking
3/16" plate on decking
Rack 6 x 6x 1/2 wall tube
Specifications subject to change
 
 
Faster, safer, easier